KB-36111: Driver for communication with Altus Piccolo 106 PLC.
Question: Which driver is used to establish communication with an Altus Piccolo 106 PLC? Solution: This PLC uses Altus ALNET I driver (Alnet 1v2 driver). However, if an ethernet module…
Autor: Elipse Software
Sample Application – ASCII Generic Driver.
1) Introduction Due to a great number of devices whose communication occurs via ASCII protocols, Elipse Software has developed the ASCII Generic Driver. This driver is used to establish a…
KB-34421: Differences between NBR14522 and NBR14522_SU drivers.
Question: What is the difference between NBR14522 and NBR14522_SU drivers?Solution: NBR14522 – Reads mass memory, and is read by the optical port; NBR14522_SU – Reads the user’s output, and supplies…
KB-27477: Telnet server communicating with E3.
Question: Is it possible to connect and exchange data with a Telnet server via E3? Solution: Yes, it is. To do so, use ASCII driver and create two tags with…
KB-33687: Communication with SPABus driver.
Question: Is it possible to establish communication with SPABus driver via TCP/IP? Solution: Yes, it is. This has been possible since the driver’s version 2.01 Build 2.
KB-26825: Sending data via serial port.
Question: I want to send data via the computer’s serial port (to write in the device’s internal registers). Can ASC II Generic driver do this? Solution: Yes; however, the device…
KB-29714: Interpreting information up until the finalization character.
Question: How can I have a driver interpret some information up until the finalization character? Solution: To do so, go to Driver’s Extra Settings and configure the RX as %tCS.…
KB-31996: Communication with PIC microcontroller.
Question: How can Elipse E3 or SCADA communicate with a PIC microcontroller? Solution: To do so, use the ASCII driver. However, it will be necessary to implement the protocol at…
KB-34187: Driver for barcode reader.
Question: Which driver is used for communication between E3 and a barcode reader? Solution: To identify the appropriate I/O driver for a certain application, you must first check the communication…
KB-32164: Importing new variables.
Question: When a new variable is inserted into the PLC and the list is imported, why is the sequence of I/O tags indexes altered? Solution: To add new variable, use…